I hope you enjoy reading this blog.
Submersible pump: Tips for setting up the pond without a pump
Submersible or dirty water pumps, what they are for and why a pond without a pump is a better and more natural alternative.
What is a submersible pump for?
A submersible pond pump is a type of water pump that is submerged in water to move water. It is often used to pump water out of the pond so that major pond maintenance can be performed. But a submersible or dirty water pump can also be used to circulate pond water so that oxygen-rich water is maintained and algae growth is prevented. Submersible pumps are often used in conjunction with pond filters. They pump water to the filter where it is cleaned of suspended solids, excess nutrients and other debris before returning to the pond. Submersible pumps can also be used to power waterfalls and fountains.
Tips, advice and substantial savings
Can you put a submersible pump shallow suction under water?
Submersible pumps are specifically designed to be completely submerged in water. Hence the name "submersible pump." These pumps feature a waterproof housing that prevents water from coming into contact with the electrical components inside. When using them in the pond, it is important to consider the placement of the pump, maintenance, pump protection and the correct capacity. Make sure the pump is placed on a stable surface, preferably on a raised surface or special stand, to prevent it from sucking up bottom mud and dirt. Also, regular inspection and cleaning of the pump is essential to ensure its efficient operation and long life. This is because dirt, algae and other particles can block the inlet of the pump. Make sure power cords and plugs are safely installed and protected from weather and damage. It is also advisable to use a ground fault circuit interrupter for added safety. Finally, choose a submersible pump with the right capacity for your pond size and specific needs, such as the required flow rate for a filter or waterfall.
Want a naturally clear pond?
A beautiful pond is easier than you think.
How deep should a submersible dirty water pump be?
How deep a submersible pump is allowed in the pond depends on the specific model and manufacturer. In general, however, a submersible pump should be placed at least to about 30 cm below the waterline to prevent the pump from running dry and being damaged.
What pump do I need for my pond?
A pump and filter are not necessary for your pond. What is crucial is that the pond is set up correctly according to our step-by-step plan. This proper setup will keep your pond naturally balanced and prevent common pond problems. What you do need is substrate on the bottom, adding pond bacteria 2x a year to the water and placing enough aquatic plants of various species. A naturally designed pond not only looks nicer than a pond with a pump and filter, but is also cheaper to set up. In addition, a natural pond requires much less maintenance, which makes it both time- and cost-saving in the long run.
Pond Pump |
Oxygen Plants |
|
❌ 2 times a year | ✅ Never | |
❌ Some years | ✅ Long-term | |
❌ No | ✅ Yes | |
❌ Neutral/disturbing | ✅ Promotes the | |
❌ Replacement & flow | ✅ Low to no cost | |
❌ Rarely | ✅ Yes, attracts various animals | |
❌ Limited | ✅ Efficient | |
❌ Limited | ✅ Natural control | |
❌ Power consumption | ✅ Environmentally friendly | |
❌ Yes | ✅ No |
How much power does a submersible pump use?
The power consumption of a submersible pump for a pond depends greatly on the specific model and power rating of the pump. For smaller ponds, a submersible pump can consume between 10W and 50W, for medium-sized ponds, consumption can vary between 50W and 150W, and for larger ponds or koi ponds where more filtration and flow is needed, consumption can range from 150W to 500W or even more. Of course, the annual cost of this also depends on the number of days and hours per day the pump is running, but on average the annual cost of using a submersible pump is around 90. On top of the energy costs come costs such as purchase, maintenance and of course the time you spend on maintenance.
Pond pump 12v: What to use for?
Simon van der Velde
Pond specialist and aquatic plant grower since 1986
Want to receive the best pond tips all year long, complete with exclusive promotions?
Simons Pond Advice Book
- Choose your language of the book
- Complete pond handbook
- 100+ pages from construction to maintenance
Loose Oxygen Plants Set
- For 500 - 1,000 liters of water
- 16 plants
- Placement: loose in the water
BACTA CLEAR
- Pond bacteria for 1,000 to 20,000 L
- 100% eco: clear water fast
- Safe for humans, plants & animals
White Water Lily - Nymphaea Albatross
- Large water lily
- Full-grown height: 10 cm
- Placement: -10 to -100 cm
Complete Pond Package - Small - Red
- For 100 - 500 L
- 19 plants + extras
- Placement: -1 to -100 cm
Pond substrate - 40 liters
- 40 L covers 1 m² ↥ 10 cm
- Heavy duty quality for the best filtration
- Extra porous: optimal plant growth
Mini Water Lily - Red - Nymphaea Pygmaea Rubra
- Small water lily
- Full-grown height: 5 cm
- Placement: -10 to -40 cm
Complete Pond Package - Medium
- For 500 - 1.500 L
- 36 plants + extras
- Placement: -1 to -100 cm
Plant Filter Package - Medium
- For 3 - 4 m²
- 64 plants
- Placement: -1 to -80 cm